Deep Pour Epoxy Resin: A How To DIY Guide For Beginners
Resin art is gaining popularity and can be used for many crafts. While this is an easy form of art to master, many people are unsure of how they can begin creating resin crafts.
Do you want to learn more about deep pour epoxy resin and how you can make epoxy resin crafts? Keep reading this beginner's guide to learn the basics of epoxy resin DIY.
Decide What You Want to Make
One of the most important things you need to do before you begin epoxy resin crafts is deciding what you want to make. This will influence every other step, including what type of resin you buy, what molds you will need, and more.
There are so many crafts that you can make with deep pour resin. One popular type of resin craft is jewelry. This can range anywhere from earrings to necklaces and more.
Many people also like making decor items! For example, you can use deep pour resin to make coasters, jewelry trays, paperweights, and even wall art No matter which type of resin art you want to make, you need to decide beforehand. This will allow you to get everything you need for your project.
Choose The Right Resin
Next, you will want to choose the right type of epoxy resin. The type of resin you need will vary for different types of resin. For example, there are types of high viscosity resins that are great for thin coatings. Because it is thicker, this isn't great for crafts that require pouring more than a centimeter or two of resin.
Another type of resin is low viscosity resin. These are also known as deep pour clear epoxy resin. With this type of resin, you can pour more layers and create thicker layers of resin.
This is great for art projects like river tables, trays, and more.
You also want to determine how much resin you will need for a project! You may not need much for smaller projects, like jewelry. Make sure you buy enough resin for the project you want to do!
Learn About Resin Protection Tips
Many people don't realize how messy it can be to work with resin. It is a very sticky substance that is not easy to clean. This is why it is important that you follow tips to protect yourself and your work environment from resin.
Resin kits also include chemicals that can be dangerous for you. To stay safe, you should always wear gloves when you are working with resin and you should work in well-ventilated areas.
It is also a good idea to wear protective. By wearing long sleeves and pants, you will prevent resin from sticking to your skin. It is much easier to throw out old clothes than it is to clean up resin.
Buy Any Other Supplies
If you are using deep pour resin for a craft, you may need to buy molds. For example, you can find some molds that allow you to make coasters, trays, or even jewelry.
Depending on your project, you will need to buy different types of molds. These are typically made from silicon to make it easy to separate once the resin is cured. We offer a great overall set of resin molds.
Many people also recommend using a heat gun when working with resin. This can keep your projects from forming bubbles and will also help them cure more quickly. If you don't have access to a heat gun and don't want to buy one, you can use a hairdryer as well.
Mix and Pour
After you have all the supplies, you will begin mixing and pouring your resin for your craft! Make sure you mix your resin carefully by following the directions on the packaging. Once you mix it, you need to pour your resin immediately.
Resin has a relatively short working time. After about 30 minutes, your resin will develop a gel consistency and will begin to harden. Once you reach this stage, you will no longer be able to pour your resin.
To avoid wasting any material, you can mix the resin in small batches that will allow you to pour your molds before the resin hardens.
Then, leave it in a protected and clean area to prevent dust and other particles from hardening into your resin. Depending on the size of your project and what type of resin you are using, the cure time will differ.
You can usually expect it to take at least a few hours or up to a few days for your resin to cure.
Finally, you want to put any finishing touches on your resin! For example, some molds may leave behind rough edges on your resin. You can smooth this out with a file or a sander.
You may also have drips of resin on your crafts. These can also be sanded down. If you are making jewelry, you can add hooks or chains to your project!
Find The Best Deep Pour Epoxy Resin Supplies
Learning how to work with deep pour resin is an exciting prospect. It is easy to create several types of crafts, especially when you follow these tips. However, it is important that you find the best resin supplies when you are starting your crafts.
If you are looking for supplies, Hippie Crafter can help! We offer craft supplies for any type of project, including deep pour epoxy resin. Click here to learn more about how you can create amazing crafts with our products!